Direct-to-Film Transfer Heat Pressing Instructions

Preparation:

Use a lint roller to clean the press area. Pre-press the garment for 5-7 seconds to remove moisture. (OPTIONAL)

Pressing:

Place the design on the garment and press with medium to high pressure.

Use the settings below and adjust as needed.

First Press: Use firm pressure at 300-315°F for up to 15-seconds. Let the transfer cool completely before peeling the film (Cold Peel), as this gives the best results.

Second Press: Reapply firm pressure for up to 7-seconds to ensure maximum adhesion.

Care Instructions

• Store transfers in a dry place.
• Wash garments in warm water; tumble dry on delicate.
• Do not iron the design directly. If needed, iron inside out on low.

For any questions, please contact us via chat/email/call/text.